Lifts from steering stem of bike (see inset photos) to allow front wheel and fork leg removal. Lifts bike easily and stores compactly. Newfront conversion may be purchased separately to convert a rear stand to a front (but always use a rear before lifting front). Sold complete with pin for any bike. Additional pins sold separately.
$144.00

        

Rear Stand Based on a stable, modular platform; rear stands are width adjustable to fit virtually all sport bikes. Top supports are interchangeable so you can upgrade your stand as you change bikes. You can now convert a rear stand to a front (see Newfront). We offer customs including narrow, wide and Harley rears.
$134.00

   

Allows wheel removal for all Ducatis, Hondas, MV Agustas and Triumphs with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete but pins are interchangeable to fit other bikes.
$134.00

Allows quick wheel removal. Fits virtually all sport bikes. No setup or adjustment required. No metal to metal contact..
$134.00

Extra heavy, low profile. For permanent mounting or quick-removal.
Includes mounting hardware for one location.
$45.00
Additional mounting hardware kits $3.00.

Call for application
If you have any questions, please email
or call Washington Cycle Works
908-835-0043

520 Conversion kit

AFAM has been making sprockets for over 20 years, during that time, they have refined their manufacturing and design techniques to such a level that their standards now exceed those of the O.E.M's.

AFAM's design department uses computer technology to produce innovative products. Through computer programs, sprocket designs can be stress tested prior to undergoing tough field tests. AFAM only makes motorcycle sprockets and has built a worldwide reputation for making sprockets to the highest standards, from the best materials.

All Japanese factory teams and many U.S. works teams rely on AFAM and so should you. AFAM's sprockets are made on precision, computer controlled equipment. The teeth are machined to the latest standards, for maximum chain life and more efficient power transmission (most U.S. sprocket makers are still using outdated machining data). Machining is carried out on a gear hobbing machine. The teeth and the outside diameter are cut at the same time.

This makes sure the teeth are concentric to the sprocket center. Most O.E.M's demand a max. run-out of 0.5mm, all AFAM sprockets have a max. run-out of only 0.2mm, more than twice as accurate as the industry standard!

ERV2(exclusive race) chains are constructed and designed for motorcycle racing. This high performance, light weight and low friction chain provides the winning edge in world class competition. Chain has gold plates and comes supplied with a rivet style master link

Retail Price: $168.00 Washington Cycle Works Price: $119.00

Call for application
If you have any questions, please email
or call Washington Cycle Works
908-835-0043

Choosing a Öhlins shock absorber is simple... because we have made the choice for you! Based on your bike's performance, price and space available we have designed a shock that we think suits it, both when it comes to price and performance. We start by choosing a type, which we tailor-make for your bike. The basic set-up, both the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and not guesswork!

Fox TC-R

The development of the TC-R shock is based on meeting the demands of the professional racer and the hard-core enthusiast. The biggest single request was to engineer an ultra-light, high-performance shock to enhance performance. The 1999 TC-R has been engineered to be as light as possible. CNC machined 6AL-4V titanium, and 7075 and 6061 aluminum result in a high-performance shock with a significant weight savings over a stock shock.

Penske The 8900 Series shock

Three options are available for a wide range of Compression adjustments and the  twenty-five click rebound adjuster offers extra fine rebound tuning. Integral reservoir contains increased nitrogen volume for more consistent damping over a long race. A floating piston separates the nitrogen from the oil, rather than a bladder type device that can fail. Fully CNC machined 7075-T6 aluminum construction with a hard anodized finish, makes this unit both light weight and strong. Heavy duty 5/8" diameter chrome plated stainless steel shaft The best spring available, matched to the rider's weight and adjustable spring pre-load. High quality spring steel valve shims make up the main piston valving, which can be changed by the owner to customize the damping characteristics of the shock. Low friction / stiction shaft bearing and high quality seals and wiper to keep out dirt. Adjustable length eyelet to maximize rear ride height without removing the shock from the motorcycle

SCOTTS DAMPER KITS

STORZ DAMPER KITS

OHLINS DAMPER KITS

CHICKEN HAWK
Motorcycle Standard Tire Warmers
$429.00

Standard Tire Warmers - Chicken Hawk warmers are easy to put on and the easiest/fastest to take off. Utilizing Nomex/Kevlar insulation to keep the heat in - Chicken Hawk warmers have a heat up time and target temperature that is designed to the specifications of Dunlop, Michelin & Pirelli racing tires - The most durable warmers in the paddock using high impact temperature controllers, full coverage Kapton Heating elements. Featuring two new changes for 2002: NEW Melt-Proof Inner Liner & Neon Operating light, whichs lets you know the warmer is energized and when full temp is reached! - QUALITY & PRICE - our unit is 2nd to none and is one of the most economically priced

.

CHICKEN HAWK
Motorcycle Pole Position Tire Warmers
$520.00

Pole Position model tire warmers - This advanced design incorporates the features that Grand Prix teams enjoy: Temperature Adjustable - Change the operating temperature of the tire warmer with a quick-disconnect Temperature Contoller. Each set is supplied with 175 & 135 degree settings; custom temperatures available upon request. Operating Light - small neon bulb on each warmer lets you know it is working properly and when the tire has reached full temperature - Hard Case - this camcorder style case is blow-molded and impact resistant. Two tire warmers fit perfectly and are protected for packing.

.

WOODCRAFT REAR SETS

We sell any individual piece for replacement parts. CONFIDENCE: Trick knurled footpegs give supreme feedback and the best traction available today. RACE PROVEN: Each kit is custom tailored for rise and setback, and Woodcraft rearsets have proven their worth with over 100 national and regional championships.

WOODCRAFT 2 PIECE CLIP- ONS

EASE OF INSTALLATION: Woodcraft's trademark 2 piece body clamp makes for the easiest installation and removal of any clip-on on the market. Never again dis-assemble your front end.

ECONOMICAL: The universal replacement bars save as much as $100 per crash when many one piece OEM units require complete replacement (and subsequent front end disassembly). DETAILED: Extra time was taken on these pieces to make them super-light and add to their great looks.

EBC DOUBLE-H

EBC "Double-H" Brake Pads
Made in the USA EBC's new "Double-H" Sintered Brake Pads have an unprecedented 0.68 friction level delivering massive stopping power on all street/sport and race bikes.  They are also kind to discs and the world's first aftermarket brake pad delivered with stainless steel radiator plates to reduce heat conduction into the hydraulics.

EBC
GFA HH SUPER BIKE RACE

EBC "Superbike GFA HH " Race Pads
Following the installation of our"pressure sintering" furnaces at our Cleveland, USA facility a whole new rule book has been established on performance levels of sintered metal brakes. New formulatons will be available for spring 2003 to maintain EBC's leadership in the privateer and factory race pad fitment market.


• G Faster bed in
• G Highest heat stability
• G Maxium braking power
• G Consistent performance throughout life

EBC ORGANIC

EBC Organic (Kevlar) Street Bike Pads
Still number 1 selling EBC formulation German Moto Rad magazine tests rated these above most organics KBA approved and will comply with Reg90 * Typical organic feel which many riders prefer

UNIVERSAL BRAKE LINE KITS: All Galfer Brake Line KITS are made with Dupont Teflon Steel braided cable. There are 16 braided lines of steel around the inner section, making the line expansion close to zero under all conditions.  Galfer hose meets or exceeds the following tests and  requirements: SAEJ 1401, UNE 26-399-89, ISO 3996. Temperature range : -67/ +464(f).  Braking power, Galfer lines will require less pressure at the brake lever to stop the bike, allowing the rider to use less force and stop faster.  All Brake lines are coated the entire length of the line to protect the bike from scratches and the brake fluid from humidity.  All Galfer pre-made brake line kits include all the necessary SS banjo bolts and washers. Make sure that all brake line or hydraulic clutch  installations are done by a certified professional motorcycle mechanic. All FRONT SS Brake Lines Kits Come  w/ Dual Lines off the Master Cylinder

Back to top

for application pertaining to specific models.
Call Ron 908-835-0043
If you have any questions, please email

WHY A BACK PROTECTOR?  Whether Racing or Touring, top quality protective clothing is an investment for the unexpected. Increasing riders of all ages are wearing these lightweight, yet immensely rugged back protectors. Not only do they provide a very broad padded area across the back, but a 51/2" section of Carbon/Kevlar provides a protective anti-penetration shield in the vital spinal area. Adjustable shoulder straps, and wide elastic velcro waist belt provides support as well as protection. The slim profile of the Race Protector fits comfortably under full leathers. The Tourer version adds comfort and protection to leather or other touring jackets.
TOURERS - Many tourers and older riders also appreciate the support a back protector gives, and find it can reduce backache after a long day in the saddle.
RACING - Racers worldwide use the Bohn back protector. Whether in regional or national championships, or the ultimate 500 Grand Prix - riders choose Bohn for their protection. Multi-World 500GP Champion Mick Doohan has used one for 3 years - is there a better testimonial?
WHY CARBON / KEVLAR? Carbon fiber is extremely strong and light - Kevlar is fabric-like and has tremendous resistance to puncture and tearing, which is why it's used for ballistic vests etc. Carbon & Kevlar together produce an awesome combination of strength and flexibility providing an anti-penetration barrier in a very thin cross-section. An extra layer on Kevlar is placed underneath the composite, which is then mounted over the plasticised absorbent rubber foam carrier. This provides unbeatable protection in a section just over 1/2" thick!

Back to top

for application pertaining to specific models.
Call Ron 908-835-0043
If you have any questions, please email

INTUITIVE
FRAME SLIDERS


     

Intuitive Race Products brings you the finest after market Motorcycle Road Racing and Sport Bike acccessories available. All of our products are made from the highest quality materials.  
Frame Sliders Now including colored sliders - red, green, & two blues.  Check out our amazing selection of frame sliders.   If there's not one to fit your motorcycle - let us know.
Knee Sliders The ultimate knee slider - Now available in Ebony black as well as Ivrie white!  Will not get hot! Incredible wear characteristics!

Back to top

for application pertaining to specific models.
Call Ron 908-835-0043
If you have any questions, please email

Battery Tender PLUS (by Deltran) is a 1.25 amp battery charger. 
Battery Tender PLUS fully charges a battery and maintains it at proper storage voltage without the damaging effects caused by trickle chargers. Includes a quick connect harness for hard to reach areas.

• Original top quality tie downs.
• 1" high quality nylon webbing with 4500 lb. tensile strength.
• 66" length with a maximum breaking strength of 1200 lbs. and a working load capacity of 400 lbs. per strap.
• Patented cam-buckle locks webbing securely to avoid slippage.
• Vinyl coated "S" hooks protect paint and chrome.
• Packaged in pairs with instructions.

ANCRA SOFT HOOKS

• The best protection for paint and chrome.
• Loop this 1" nylon webbing around handle bars, fork braces or rear seat rails and insert a tie down hook.
• Rated at 1200lbs breaking strength
• Packaged in pairs.
• Available in 12" and 18" lengths.

SAFTEY WIRE

RACER DUCT TAPE

Back to top

for application pertaining to specific models.
Call Ron 908-835-0043
If you have any questions, please email

NRC Engine Covers and Gaskets Heavy duty, bolt-on replacement for stock engine covers Heat treated aluminum alloy, CNC machined for precise fit Designed to retain all original internal charging components and sensors

Back to top

for application pertaining to specific models.
Call Ron 908-835-0043
If you have any questions, please email

Renthal Grips have been developed and tested using the input and assistance of top factory race teams from Europe and the USA. The result is a grip that is specially formulated to achieve the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Special technology ensures maximum retention of tackiness under exposure to sunlight and weather. The 'Raised Diamond Surface' gives excellent feel, shock absorption, and allows the use of the lowest possible grip diameter

Back to top